Lenovo Flex System x280 X6 Compute Node Installation And Service Manual page 271

CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 12
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Check the Chassis Management Module or Flex System Manager event log for any fan- or cooling-related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
80070101-2d01ffff Sensor [SensorElementName] has transitioned from normal to non-critical state.
Explanation: The temperature of the Platform Controller Hub (PCH) has exceeded its specified threshold.
May also be shown as 800701012d01ffff or 0x800701012d01ffff
Severity: Warning
Alert Category: Warning - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 12
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Check the Chassis Management Module or Flex System Manager event log for any fan- or cooling-related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
8007010d-2582ffff Sensor [SensorElementName] has transitioned from normal to non-critical state.
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 8007010d2582ffff or 0x8007010d2582ffff
Severity: Warning
Alert Category: Warning - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 60
Automatically notify Support: No
User response: RAID Vol State :
8007010d-2b81ffff Sensor [SensorElementName] has transitioned from normal to non-critical state.
Explanation: The FlashDIMM agent has indicated that this system contains a FlashDIMM with Less than 1% write
warranty remaining
May also be shown as 8007010d2b81ffff or 0x8007010d2b81ffff
Severity: Warning
Alert Category: Warning - Other
Serviceable: Yes
80070101-2d01ffff • 8007010d-2b81ffff
Chapter 6. Troubleshooting
259