Lenovo Flex System x280 X6 Compute Node Installation And Service Manual page 263

May also be shown as 80010b013701ffff or 0x80010b013701ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Check the Chassis Management Module or Flex System Manager event log for any fan- or cooling-related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
80010b01-3702ffff Numeric sensor [NumericSensorElementName] going high (upper non-recoverable)
Explanation: The inlet 2 temperature has risen above the specified threshold. The system has initiated a hard
shutdown.
May also be shown as 80010b013702ffff or 0x80010b013702ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Complete the following steps:
1. Check the CMM or FSM event log for any fan or cooling related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
80030006-2101ffff Sensor [SensorElementName] has deasserted.
Explanation: The secure UEFI update has been completed.
May also be shown as 800300062101ffff or 0x800300062101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0509
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
80010b01-3702ffff • 80030006-2101ffff
Chapter 6. Troubleshooting
251