How To Remove And Attach The Cover - Mitsubishi Electric AE-200A Service Handbook

Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

[IV Product specifications and functions]

4. How to remove and attach the cover

(1) AE-200/AE-50
Item
Use the supplied hex key to remove the hex socket bolt
from the bottom of the decorative cover.
Attach the decorative cover to the AE-200/AE-50 unit
and then use the supplied hex key to screw the hex
socket bolt into the bottom of the decorative cover.
[Wiring at the back]
Remove the two fixing screw, lift up the service cover,
and remove the cables from the holes for wiring.
Unhook the bottom hooks from the AE-200/AE-50 unit.
[Wiring at the bottom]
Remove the two fixing screws and unhook the bottom
hooks from the AE-200/AE-50 unit.
[Wiring at the back]
Insert the bottom hooks of the service cover into the
AE-200/AE-50 unit.
Close the cover so that the power supply cable and
M-NET transmission line pass through the holes for the
wiring of the service cover.
Secure the service cover with the two fixing screws.
[Wiring at the bottom]
Check that the power cable and M-NET transmission
line are routed through the knockout holes and
connected to the terminals.
Insert the bottom hooks of the service cover into the
AE-200/AE-50 unit and then secure cover the two fixing
screws.
Work procedure
(Supplied)
・ How to remove the service cover
1.
Remove the two fixing screws and lift up the cover.
(Do the same for the wiring at the bottom)
2.
Remove the cables from the holes for wiring.
(Only for the wiring at the back)
3.
Unhook the bottom hooks from the AE-200/AE-50 unit. (Do
the same for the wiring at the bottom)
32
Illustrations

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-200eAe-50eEw-50eEw-50aAe-50a

Table of Contents