Mitsubishi Electric AE-200A Service Handbook page 20

Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

[III System restrictions and notes]
(6) When using the apportioned electricity billing function and there are 51 or more air-conditioning units
By using4 AE-50/EW-50 expansion controllers, up to a total of 200 air-conditioning units can be monitored and operated using the
apportioned electricity billing function.
・ When the apportioned electricity billing function is used, the M-NET transmission line of the AE-200 cannot be used.
・ When using the Web browser function, access the AE-50/EW-50 to perform monitoring and operation.
・ Registration of the license is required for each centralized controller.
・ An electricity meter needs to be connected to each AE-200 system. Electricity meters connected to other AE-200 systems cannot
be set.
・ To set the apportioned electricity billing function, Initial Setting Tool is required.
・ To perform the charge calculation of the apportioned electricity billing function, Charge Calculation Tool is required.
・ When using the apportioned electricity billing function, use Ver.7.23 or later of AE-200/AE-50/EW-50.
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-200eAe-50eEw-50eEw-50aAe-50a

Table of Contents