Various Functions; Functions And Required Equipment And Materials - Mitsubishi Electric AE-200A Service Handbook

Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

[IV Product specifications and functions]

[4] Various Functions

1. Functions and required equipment and materials

The following table lists the functions supported by the AE-200/AE-50/EW-50 and the products and software required for those
functions.
Function
Web browser
Personal browser
Error mail notification
Integrated management (TG-2000A)
Yearly/weekly schedule
TG-2000A Electric energy charge (electric
energy manual entry method)
TG-2000A Electric energy charge (electric
energy metering-device method)
TG-2000A Meter charge (electric energy
metering-device method)
AE-200 Electric energy charge (electric energy
manual entry method)
AE-200 Electric energy charge (electric energy
metering-device method)
Operation
DIDO controller method
and
Free contact method
monitoring of
PLC method
general
equipment
Interlocked
DIDO controller method
control of
Free contact method
general
PLC method
equipment
(between PLC
equipment)
PLC method
(between air-conditioning
units and PLC
equipment)
Night mode
External temperature interlock control
Night setback function
Set temperature range limit setting
Temperature and humidity
measurement
Upper and lower limit warning mail
Energy management function
Peak cut control
(other system method)
Peak cut control (PLC method)
Peak cut control (PI controller method)
Peak cut control
(Peak cut level contact input)
*1
Refers to PLC for Electric Amount Count (PAC-YG11CDA), PLC for General Equipment (PAC-YG21CDA), and PLC for Demand
Input (PAC-YG41CDA).
● The above functions are subject to change without notice for improvement.
System components
41
[Legend] ○: Required
Other

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-200eAe-50eEw-50eEw-50aAe-50a

Table of Contents