Mitsubishi Electric AE-200A Service Handbook page 81

Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

[V Troubleshooting]
[Ping check method]
Ping the AE-200, AE-50, EW-50, etc. from the command prompt of a PC.
How to display the command prompt
In Windows 7
Display the Start menu of Windows.
Select [Command Prompt].
Run the following in the command prompt.
ping␣-t␣[IP address of AE-200, AE-50, etc.]
[Example] ping -t 192.168.1.1
Check that the connection was successful from the message displayed when the command was run.
To quit ping, press the Ctrl and C keys on the keyboard at the same time.
<Result when could be pinged (example when successful)>
<Result when could not be pinged (example when failed)>
Single-byte space (1 character)
77
Successful
example
If "Request timed out." is displayed,
recheck the LAN connection status, IP
address, etc.
(Supplement)
The response to pings may be
irregular depending on the
equipment.
If there is no response after
continuing pinging for a certain time,
quit ping by pressing the Ctrl and C
keys.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-200eAe-50eEw-50eEw-50aAe-50a

Table of Contents