Ae-200/Ae-50/Ew-50 Update Procedure - Mitsubishi Electric AE-200A Service Handbook

Hide thumbs Also See for AE-200A:
Table of Contents

Advertisement

[VIII Maintenance]

[1] AE-200/AE-50/EW-50 update procedure

There are two procedures for the AE-200/AE-50/EW-50 software: "1. Procedure using a USB memory device" (cannot be used for
EW-50) and "2. Procedure using a Web browser."
Perform the update for all AE-200/AE-50/EW-50 and ensure that the software version matches.
[Required equipment]
1.
Procedure using a USB memory device
・ AE-200/AE-50
・ Use a USB memory device containing the update data file*1.
2.
Procedure using a Web browser
・ AE-200/AE-50/EW-50
・ PC containing the update data file*1. (For the PC operating environment, refer to "IV [3] PC operating environment.")
・ LAN cable (100BASE-TX straight cable of category 5 or better)
・ Switching HUB (for 100BASE-TX)
*1
Update file (AExx_FW####.dat)
xx: "200" in the case of the AE-200 and "50" in the case of the AE-50/EW-50
####: Software version Example: When Ver.7.23: 0723
[System Connection Examples]
1.
Procedure using a USB memory device
2.
Procedure using a Web browser
USB
CD
Example: IP address: 192.168.1.100
AE-200/AE-50
USB
100–240 VAC
Update PC
LAN
HUB
AE-200/AE-50/EW-50
LAN
100–240 VAC
98
IP address: 192.168.1.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae-200eAe-50eEw-50eEw-50aAe-50a

Table of Contents