Activating The Bobbin Stitch Counter - Dürkopp Adler 1767 Operating Instructions Manual

66
5.3.2

Activating the bobbin stitch counter

To activate the bobbin stitch counter:
1. Press.
 Parameter mode is started.
Press the B+ button of the Programming button group repeat-
2.
edly until 06 appears on the display:
If parameter 00 does not appear:
Press the D+ button repeatedly until the parameter appears
on the display.
3. Press.
 The LED of the
display.
Press the D+ button.
4.
 1 appears on the display.
5. Confirm your selection with
 The bobbin stitch counter is activated.
6. Exit parameter mode with
To deactivate the bobbin stitch counter again, in category 06
change parameter 00 to 0.
button flashes. 0 appears on the
.
.
Operating Instructions 1767 - 00.0 - 12/2016
Programming