46
4.13 Sewing
WARNING
Risk of injury from sharp parts!
Punctures possible.
Take care not to accidentally press the pedal.
Do NOT reach into the needle tip area.
The pedal starts and controls the sewing process.
Fig. 25: Sewing
(1) - Pedal position +1: Sewing active
(2) - Pedal position 0: Rest position
Initial position:
• Pedal position 0:
Machine stationary, needles up, sewing feet down.
To position the sewing material:
1.
Press the pedal halfway back in pedal position -1.
The sewing feet are lifted.
2.
Push the sewing material into the initial position.
(3) - Pedal position -1:
Lifting the sewing feet
(4) - Pedal position -2: Sew end
bartack and cut off thread
Operating Instructions 1767 - 00.0 - 12/2016
Operation
1
2
3
4