Table of Contents
Advertisement
20
4.3.1
Inserting or changing needles on 1-needle
machines
Fig. 3: Inserting or changing needles on 1-needle machines
①
②
③
④
(1) - Needle bar
(2) - Screw
To change or insert the needle on 1-needle machines:
1.
Turn the handwheel until the needle bar (1) is at the top dead
center.
2.
Loosen the screw (2).
3.
Pull the needle out towards the bottom.
4.
Insert the new needle.
Important
Align the needle in such a way that the groove (3) faces the
hook (4).
5.
Tighten the screw (2).
(3) - Groove
(4) - Hook
Operating Instructions 1767 - 00.0 - 12/2016
Operation
Hide quick links:
Advertisement
Table of Contents
