Servicing The Pneumatic System; Setting The Operating Pressure - Dürkopp Adler 1767 Operating Instructions Manual

Maintenance
Operating Instructions 1767 - 00.0 - 12/2016
Topping off the oil
To top up with oil:
2. Pour in oil through the refill opening (1).
 Add oil up to but not past the maximum level mark (2).
6.3

Servicing the pneumatic system

6.3.1

Setting the operating pressure

NOTICE
Property damage from incorrect setting!
Incorrect operating pressure can result in damage to the
machine.
Ensure that the machine is only used when the operating
pressure is set correctly.
Proper setting
Refer to the Technical data ( p. 107) chapter for the permissi-
ble operating pressure. The operating pressure cannot deviate by
more than ± 0.5 bar.
Check the operating pressure on a daily basis.
73