Working With The Software Feature Enabler; Enabling Additional Features - Tait TB8100 User Manual

Working with the Software Feature Enabler

Enabling Additional Features

TB8100 Service Kit User's Manual
The software feature enabler (Tools > Software Feature Enabler) lets you
enable additional feature sets in the TB8100 base station. The base station
already has these feature sets but it needs license keys to enable them. The
software feature enabler also displays the status of all feature sets and lets you
disable any that are enabled.
The form displays the name and reciter serial number of the base station you are
connected to. Each row in the table displays information about a feature set: the
Feature code used to order a feature set, its name, and whether it is enabled or
disabled. The Seq column indicates how many times it has been enabled or
disabled.
If you want a feature set, obtain a license key from Tait for that feature set, and
then use the Service Kit to enable it.
To enable a feature set
1. Connect and log on to the base station with the Administrator access level.
2. If you received the license key in a license file, copy that file (and any others
that you received for other feature sets or other base stations) to the Service
Kit's license file folder (select Tools > Options to see which folder the
Service Kit uses).
3. Go into Standby mode, and then select Tools > Software Feature Enabler.
4. Click the feature set to select it.
5. If you received a license file, click Find License File. This searches the
license file folder for a license file for the current base station and the selected
feature set. If the Service Kit finds one, it displays the license key (in the
feature set's row and in the Feature License Key boxes), and increments the
Seq column by 1.
6. If you don't have a license file, enter the license key into the Feature License
Key boxes.
Working with the Software Feature Enabler 61