Tait TB8100 User Manual page 137

TB8100 Service Kit User's Manual
To add a signalling profile
1. Select Configure > Base Station > Signalling Profiles. The Signalling
Profiles form appears.
2. Click Add. The Add Signalling Profile window appears.
3. In the Profile name box, enter a suitable name for the profile.
4. In the Subaudible Signalling tab, select the Subaudible filter check box
if you want to filter subaudible signalling out of the audio sent to line. (This
is only needed if the profile does not specify a subaudible tone or code. It
only has an effect if the current channel profile selects one of the speech
filters, see "Filter" on page
5. Set up the default encoding of transmitted signals.
a. In the Line-controlled base/mic box, specify the subaudible
signalling type and the tone frequency that the base station will use when
it transmits audio from its line in.
b. In the Talk through repeater box, optionally specify the
the base station will encode by default when it transmits received audio.
This setting is not used if you specify tones to gate the receiver and one
of those tones is received.
6. In the table, specify up to 16 subtones that you want the base station to
recognize.
a. In the Decode Signal column, select a tone or code. CTCSS tones
appear prefaced by a 'C' and DCS codes are prefaced by a 'D.' The rest
of the row now displays default settings.
116.)
Working with Signalling Profiles 127
subtone that