Diagnosing Problems - Tait TB8100 User Manual

Diagnosing Problems

TB8100 Service Kit User's Manual
From the Service Kit, you can carry out a variety of tests on aspects of the base
station you are logged on to. These can help you diagnose any problems you
may be experiencing. The base station must be in Standby mode, which takes
it out of active service.
To carry out a diagnostic test
1. On the toolbar, click Diagnose. The navigation pane displays a menu of
options.
2. Click the Mode icon and select Standby mode. This takes the base station
out of service.
3. In the navigation pane, click a subheading (for example 'Self Tests'); the
main part of the Service Kit window changes to reflect your selection.
4. Click Start Test. View the results of the test on-screen.
5. If necessary, click Stop Test.
6. Return the base station to Run mode.
Diagnosing Problems 23