Disabling The Power Saving Modes Feature Set; Disabling The Default Radio System Feature Set - Tait TB8100 User Manual

TB8100 Service Kit User's Manual
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.

Disabling the Power Saving Modes Feature Set

You can only disable this feature set if the base station does not use it.
A disabled feature set can only be re-enabled by
Important:
purchasing a new license key. The original feature license key
cannot be re-used.
1. Check the Reciter Serial Number box to make sure that you are logged
on to the correct base station.
2. Make sure that all channel profiles have Sleep and Deep Sleep modes
disabled.
3. Go into Standby mode.
4. Select Tools > Software Feature Enabler.
5. Select the feature set's row.
6. Click Disable.
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.

Disabling the Default Radio System Feature Set

If the Default Radio System feature set is disabled, the base station cannot
operate in Run mode. You can configure it, monitor it, and carry out
diagnostic tests on it, but not use it as a base station. It is suitable for training
purposes only.
A disabled feature set can only be re-enabled by
Important:
purchasing a new license key. The original feature license key
cannot be re-used.
1. Check the Reciter Serial Number box to make sure that you are logged
on to the correct base station.
2. Go into Standby mode.
3. Select Tools > Software Feature Enabler.
4. Select the feature set's row.
5. Click Disable.
The progress bar indicates how far the disabling has progressed. On
completion, a new number appears in the Feature License Key column.
Communicate this new number to Tait if you are entitled to a refund or if
you want to re-enable the feature set.
Working with the Software Feature Enabler 63