Module Details; Viewing Reciter Information - Tait TB8100 User Manual

Module Details

Viewing Reciter Information

Module
Product code
Band
Receiver setting
Exciter setting
System interface
TB8100 Service Kit User's Manual
The Service Kit can display details about the reciter, PA, and
station you are logged on to. Items under the heading Module Details give you
information about the module such as its frequency range and firmware version.
To monitor the way the base station is operating, see
Information" on page 71.
The Reciter form (Monitor > Module Details > Reciter) lets you view
information about the reciter
Use it to confirm exactly what it is that you are dealing with.
The form has several read-only fields, an LED indicating whether there are any
reciter alarms, and an area that gives version information.
The name of the module (reciter) followed by a number. This number is set by
the rotary switch on the front of the reciter and plays a role in control bus
communications within the subrack.
The product code and name for the type of reciter.
The RF frequency band of the reciter. This is the frequency range that the
reciter is type-approved to operate in.
The current switching range
Calibration Kit.
The current switching range of the exciter. This can be changed using the
Calibration Kit.
The type of system interface card that the reciter is fitted with.
module of the base station you are logged on to.
of the receiver. This can be changed using the
PMU of the base
"Operational
Module Details 67