Tait TB8100 User Manual page 128

Microphone
Filter
118 Part F: Configuring Channels
The upper drop-down list specifies the microphone's line out audio path.
Option Description
None The microphone has no line audio path.
Balanced Connects the microphone to the balanced line output.
Unbalanced Connects the microphone to the unbalanced line output.
All Connects the microphone to both the balanced and
unbalanced line outputs.
The lower drop-down list specifies the microphone's transmit audio path.
Option Description
None The microphone has no audio path to the transmitter
Tx A Connects the microphone to the transmitter using the Path A
filter
Tx B Connects the microphone to the transmitter using the Path B
filter
Select Tx A or Tx B so that a technician can use a microphone
Tip:
to transmit using the base station.
Transmit Path
In the Add or Edit Channel Profile dialog box, Signal Path tab, the lower area
lets you configure transmit paths. A transmit path connects received audio or a
line input to the transmitter.
The Filter drop-down lists let you select an audio filter for each enabled
transmit path. The options are the same as for the receive paths, except that
Pre-emphasis filters replace the de-emphasis ones.
© Tait Electronics Limited December 2007