Tait TB8100 User Manual page 46

Remote
Connection Using
an Asynchronous
Port Switch
Remote Ethernet
Connection
36 Part C: Basic Tasks
The Service Kit can connect remotely to any of a number of base stations via a
single link if an asynchronous port switch is used. For details on setting this up,
see TN-906-AN Connecting to TB8100 Base Stations via an Asynchronous Port
Switch.
front
TB8100
rear
rear
rear
TB8100* TB8100
front
front
* subrack with two base stations
The Service Kit communicates over this physical configuration using a Modem
Dialup connection type, with the use of the port switch enabled and
configured. In subracks with more than one base station, the Service Kit can
connect to each base station.
The Service Kit can connect remotely using TCP/IP over Ethernet to a base
station with an Ethernet interface. For details on this, see TN-1142-AN .
Front
TB8100
Rear
Front
TB8100
Front
Rear
TB8100
Rear
RS-232
APS
Modem
Null modem
Router
© Tait Electronics Limited December 2007
PSTN
Modem
Service Kit
PC
Service Kit
PC