Cloning Printer Settings - Xerox Phaser 6510 User Manual

System Administrator Functions

Cloning Printer Settings

You can use cloning to copy configuration settings from one printer to another printer on the same
network.
Note: Before using the clone feature, ensure that the source printer clone file is compatible with the
destination printer.
To clone the printer settings:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to
the Administrator
At the bottom of the Home page, click Cloning.
3.
4. To install a clone file:
a. For Install Clone File, click Select.
Locate, then select a clone file from the source printer, then click Open.
b.
• To select a different clone file, click the change file icon.
To remove the selected clone file, click the Trash icon.
•
Note: Removing the clone file does not delete it from the computer.
c. To install the selected clone file, click Install.
5. To create a clone file:
a. Select the parameters to clone from this printer.
• To select individual parameters to clone from this printer, select the desired parameter.
To choose all settings, select Select/Clear All.
•
• To clear all settings, clear Select/Clear All.
b. Click Create.
c. If prompted, save the clone file to a location that you can remember easily when you need the
file for installation.
Note: If you are not prompted to save the file, look for it in the Downloads folder on your computer.
When you are finished creating or installing a clone file, click Close.
6.
162 Xerox Phaser 6510 Color Printer
® ®
User Guide
on page 186.
Logging In as