Printer Settings; Accessing Power Saver - Xerox Phaser 5550 User Manual

Printer Settings

This topic includes:
■
■
■
■
■
■

Accessing Power Saver

To save energy, the printer enters a Power Saver, low-energy consumption mode after a
pre-defined period of time since its last activity. In this mode, most printer electrical systems
are shut down. When a print job is sent to the printer, the printer enters Warmup Mode. You
can also warm up the printer by pressing the OK button on the control panel.
If you find that the printer is going into Power Saver mode too often and you do not want to
wait while the printer warms up, increase the length of time before the printer goes into Power
Saver mode. Change the timeout value as follows:
1.
2.
3.
4.
5.
Downloaded From ManualsPrinter.com Manuals
Accessing Power Saver on page 5-2
Selecting Output Options
Accessing the Startup Page
Accessing Load Paper Timeout
Selecting Tray Settings on page 5-6
Changing Printer Language
On the control panel, select
Select , and then press the OK button.
Printer Controls
Select Power Saver , and then press the OK button.
Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the printer goes
into Power Saver mode.
Press the OK button.
on page 5-3
on page 5-4
on page 5-5
on page 5-8
, and then press the OK button.
Printer Setup
Phaser® 5550 Printer
5-2
Printer Settings