Xerox Phaser 6510 User Manual page 142

Troubleshooting
Paper and Media
Your printer is designed to use various paper and other media types. Follow the guidelines in this section
for the best print quality and to avoid jams:
• Use only Xerox approved paper. For details, refer to
• Use only dry, undamaged paper.
CAUTIONS:
Some paper and other media types can cause poor output quality, increased paper
jams, or damage your printer. Do not use the following:
• Rough or porous paper.
• Inkjet paper.
• Non-laser glossy or coated paper.
• Paper that has been photocopied.
• Paper that has been folded or wrinkled.
• Paper with cutouts or perforations.
• Stapled paper.
• Envelopes with windows, metal clasps, side seams, or adhesives with release strips.
• Padded envelopes.
• Plastic media.
• Transparencies.
• Ensure the paper type selected in your print driver matches the paper type on which you are
printing.
• If you have the same size paper loaded in more than one tray, ensure that the proper tray is
selected in the print driver.
• Store your paper and other media properly for optimum print quality. For details, refer to
Storage Guidelines
Solving Print-Quality Problems
When the print quality is poor, select the closest symptom from the following table and refer to the
corresponding solution to correct the problem. You can also print a Demo Page to more precisely
determine the print-quality problem. For details, refer to
If the print quality does not improve after performing the appropriate action, contact your Xerox
representative.
Notes:
• To enhance print quality, toner cartridges for many models of equipment have been designed
to cease functioning at a predetermined point.
• Grayscale images printed with the composite black setting increment the color-pages counter,
because color consumables are used. Composite black is the default setting on most printers.
142 Xerox Phaser 6510 Color Printer
® ®
User Guide
on page 59.
Supported Paper on page 58.
Information Pages on page 28.
Paper