Xerox Phaser 6510 User Manual page 173
Hide thumbs
Also See for Phaser 6510:
- User manual (229 pages) ,
- Quick use manual (5 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Configuring Tray Priority
The Tray Priority feature determines the order in which the printer selects the tray for a print job when
you have not specified one. Tray Priority also determines how the printer selects another tray when a
paper tray runs out in the middle of a job. Priority 1 indicates that the tray is set to the highest priority.
To set the priority for a tray:
1.
At the printer control panel, press Menu.
Note:
To navigate through the menu, use the arrow buttons.
Navigate to Admin Menu, then press OK.
2.
3.
Navigate to Printer Settings, then press OK.
Navigate to Paper Tray Priority, then press OK.
4.
Navigate to the desired tray, then press OK.
5.
6.
To set the paper tray to the highest priority, navigate to Priority 1, then press OK.
Notes:
•
To print a report, ensure that the paper tray that you selected matches match the default
paper size, type, and color.
•
The Bypass Tray cannot be set to Priority 1.
•
To print a report from the Bypass Tray, remove Trays 1 and 2, then load the default paper size,
type, and color in the Bypass Tray.
7.
To establish priority for any remaining trays, repeat the steps.
To return the printer to Ready, press Menu.
8.
Configuring Paper Type Mismatch Settings
1.
At the printer control panel, press Menu.
Note:
To navigate through the menu, use the arrow buttons.
Navigate to Admin Menu, then press OK.
2.
3.
Navigate to Printer Settings, then press OK.
4.
To select what action the printer takes when a paper mismatch occurs, navigate to Paper Type
Mismatch, then press OK.
5.
To select an option, use the Up or Down arrow buttons:
Confirmation Screen: This option directs the printer to display a menu to confirm or change
−
paper settings.
Print: This option directs the printer to print with no further action.
−
−
Paper Supply Screen: This option directs the printer to display a menu to change or confirm
the source paper tray.
6.
Press OK.
To return the printer to Ready, press Menu.
7.
System Administrator Functions
Xerox
Phaser
6510 Color Printer
®
®
User Guide
173
Advertisement
Table of Contents
Troubleshooting
