Configuring Remote Services Upload; Setting Up A Proxy Server; Enabling Remote Services - Xerox Phaser 6510 User Manual

System Administrator Functions

Configuring Remote Services Upload

Remote Services is a suite of features that simplify printer ownership and administration. It provides free
services to enable administration of metered billing and supplies replenishment plans for printers on a
network.
Before you begin, if your network uses an HTTP proxy server, obtain the information about your proxy
server. For details, refer to

Setting Up a Proxy Server

1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to
the Administrator
Click Connectivity.
3.
4. For Protocols, click HTTP.
5. To enable a Proxy Server, for Proxy Server, click the toggle button.
Note: A check mark on the toggle button indicates that the setting is enabled.
6. To set the configuration type, click Setup and select an option:
If your proxy server uses automatic configuration, select Automatic.
−
− If your proxy server uses a configuration script, select Configuration Script. Type the URL to
locate the configuration script.
If your proxy server uses manual configuration, select Manual, then configure the settings.
−
For assistance, contact your system administrator.
Click OK.
7.

Enabling Remote Services

1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to
the Administrator
Click System > Remote Services Upload.
3.
4. For Remote Services, click Enable.
Click OK.
5.
212 Xerox Phaser 6510 Color Printer
® ®
User Guide
Setting up a Proxy Server
on page 186.
on page 186.
on page 212.
Logging In as
Logging In as