Xerox Phaser 6510 User Manual page 64

Paper and Media
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray. Load hole-punched paper with the holes to the left.
− For 1-sided printing, load Letterhead or pre-printed paper face up with the top edge going into
the printer.
− For 2-sided printing, load Letterhead and pre-printed paper face down with the top edge going
into the printer.
Note: Do not load paper above the maximum fill line on the width guides. Overfilling the tray can
cause the printer to jam.
64 Xerox Phaser 6510 Color Printer
® ®
User Guide