Installation And Setup Overview - Xerox Phaser 6510 User Manual

Installation and Setup

Installation and Setup Overview

Before you print, ensure that your computer and the printer are plugged in, turned on, and connected.
Configure the initial settings of the printer, then install the print driver software and utilities on your
computer.
You can connect to your printer directly from your computer using USB, or connect over a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network switches, modems, Ethernet cables, and USB cables are not
included with your printer and must be purchased separately. Xerox recommends an Ethernet connection
because it is typically faster than a USB connection, and it provides access to the Embedded Web Server.
Note: If the Software and Documentation disc is not available, you can download the latest print
drivers from www.xerox.com/office/6510drivers.
For reference:
Selecting a Location for the Printer
Selecting a Connection Method
Connecting the Printer
Configuring Network Settings
Installing the Software
34 Xerox Phaser 6510 Color Printer
® ®
User Guide
on page 35
on page 36
on page 36
on page 48
on page 52