Xerox Phaser 6510 User Manual page 144

Troubleshooting
Symptom
Color around the edge of
printing is incorrect.
Stray black dots or white areas
(dropouts).
• Vertical black or color streaks
or multiple colored streaks or
lines.
• Streaks in only one color.
Partial blanks, creased paper, or
blotted printing.
144 Xerox Phaser 6510 Color Printer
® ®
User Guide
Probable Causes
The color registration is
incorrect.
The paper is outside the
recommended specification
range.
There is debris on the rollers.
The toner cartridges are not
Xerox toner cartridges.
®
The toner cartridges are not
Xerox ® toner cartridges.
Debris in the printer is dragging
against the toner before it is
fused.
There is a problem with the
toner cartridge for that color.
The paper is damp.
The paper is outside the
recommended specification
range.
The printer is worn or damaged. For assistance, go to the Xerox
The toner cartridges are not
Xerox ® toner cartridges.
The paper is impeded in the
paper path.
Solutions
Adjust the color registration. For details, refer
to Color Registration on page 111.
Replace the paper with a recommended size
and type, and confirm that your control panel
and print driver settings are correct. For
details, refer to Supported Paper
Wipe the feed rollers with a clean damp cloth
to remove debris from the rollers.
Note: Do not touch the transfer roller or the
exposed end of the transfer belt. Fingerprints
can cause print-quality issues.
Ensure that the toner cartridges meet
specifications and replace them if necessary.
For details, refer to Consumables
116.
Ensure that the toner cartridges meet
specifications and replace them if necessary.
For details, refer to Consumables
116.
Remove any debris or paper scraps from the
paper path under the rear cover.
Check the toner cartridge for damage and
replace if necessary. For assistance, go to the
Xerox Support website at
®
www.xerox.com/office/6510support.
Replace the paper.
Replace the paper with a recommended size
and type. For details, refer to
on page 58.
website at
www.xerox.com/office/6510support.
Verify that the toner cartridges meet
specifications and replace if necessary.
For details, refer to Consumables
• Remove any paper or debris from the
paper path.
• Ensure that the trays are pushed in all the
way.
• Ensure that the rear cover is closed and
locked.
on page 58.
on page
on page
Supported Paper
® Support
on page 116.