Adjustments And Maintenance Procedures; Color Registration - Xerox PHASER 7100 User Manual

Maintenance

Adjustments and Maintenance Procedures

This section includes:
•

Color Registration ............................................................................................................................................................ 82

• Adjusting Paper Type ..................................................................................................................................................... 83
• Adjusting the Voltage Offset ....................................................................................................................................... 84
• Adjusting the Fuser ......................................................................................................................................................... 84
• Adjusting the Altitude .................................................................................................................................................... 84
• Enabling Dew Prevention .............................................................................................................................................. 85
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can run
this adjustment at other times as needed.
To perform an automatic color registration adjustment:
At the printer control panel, press the Menu button.
1.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Image Quality, then press OK.
Navigate to Adjust Color Regi, then press OK.
4.
5. Navigate to Auto Color Regi, then press OK.
To begin the calibration, at the prompt, press OK.
6.
Performing a Manual Color Registration Adjustment
Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with color
halos.
To perform a manual color registration adjustment:
82 Phaser 7100 Color Printer
User Guide