Adjustments And Maintenance Procedures; Color Registration - Xerox Phaser 6600 User Giude

Maintenance

Adjustments and Maintenance Procedures

This section includes:
•

Color Registration .............................................................................................................. 126

•
Checking the Firmware Version.......................................................................................... 128
•
Adjusting Paper Type ......................................................................................................... 128
•
Adjusting the Transfer Belt Unit .......................................................................................... 129
•
Adjusting the Transfer Roller .............................................................................................. 129
•
Adjusting the Fuser ............................................................................................................ 130
•
Resetting Defaults .............................................................................................................. 130
•
Initializing the Print Meter ................................................................................................... 131
•
Resetting the Transfer Unit ................................................................................................. 131
•
Clearing Job History ........................................................................................................... 132
•
Adjusting the Altitude .......................................................................................................... 132
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Setting Automatic Color Registration
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Select Auto Regi Adjust, then press OK.
5. Select On, then press OK.
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can
run this adjustment at other times as needed.
To perform an automatic color registration adjustment:
126 Phaser 6600 Color Printer
User Guide