GE C30 Instruction Manual page 133

CHAPTER 5: SETTINGS
For the Security panel, the following settings are available.
Table 5-3: RADIUS server settings
Setting name Description
Primary RADIUS IP IP address of the main RADIUS server.
Address Default value indicates no Primary
RADIUS server is configured, and hence
RADIUS is disabled.
Primary RADIUS authentication port
Authentication Port
Primary Accounting RADIUS accounting port
Port
Vendor ID An identifier that specifies RADIUS
vendor-specific attributes used with the
protocol
RADIUS Shared secret used in authentication. It
Authentication displays as asterisks. This setting must
(Shared) Secret meet the CyberSentry password
requirements.
RADIUS Authentication method used by RADIUS
Authentication server. Currently fixed to EAP-TTLS.
Method
Timeout Timeout in seconds between re-
transmission requests
Retries Number of retries before giving up
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
Figure 5-3: Supervisory panel
Minimum Maximum
0.0.0.0 223.255.255.254
1 65535
1 65535
See the See the following
Password password section
Requirements for requirements
section earlier
in this chapter
EAP-TTLS EAP-TTLS
0 9999
0 9999
PRODUCT SETUP
Default Units Minimum
permission
0.0.0.0 - Administrator
1812 - Administrator
1813 - Administrator
Value that Administrator
represents
General
Electric
N/A - Administrator
EAP-TTLS - Administrator
10 sec Administrator
3 - Administrator
5-15
5