GE C30 Instruction Manual page 86

Controller system
Hide thumbs Also See for C30:
Table of Contents

Advertisement

CONNECT TO THE C30
3.
Click the Quick Connect button to open the window.
4.
Select the Ethernet interface and enter the IP address assigned to the C30, then click the Connect button. The
EnerVista UR Setup software creates a site named "Quick Connect" with a corresponding device also named "Quick
Connect" and displays them on the left side of the screen.
3
5.
Expand the sections to view data directly from the C30 device.
Each time that the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct
communications to the C30. This ensures that configuration of the EnerVista UR Setup software matches the C30 model
number.
When direct communications with the C30 via Ethernet is complete, make the following changes:
1.
From the Windows desktop, right-click the My Network Places icon and select Properties to open the network
connections window.
2.
Right-click the Local Area Connection icon and select the Properties item.
3.
Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
4.
Set the computer to "Obtain a relay address automatically" as shown.
If the computer is used to connect to the Internet, re-enable any proxy server settings after the computer has been
disconnected from the C30 relay.
3-52
CHAPTER 3: INSTALLATION
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Table of Contents