GE C30 Instruction Manual page 129

CHAPTER 5: SETTINGS
3. Select the user access rights by enabling the check box of one or more fields.
The table outlines access rights.
Table 5-1: Access rights summary
Field Description
Delete Entry Deletes the user account when exiting the user management window
Actual Values Allows the user to read actual values
Settings Allows the user to read setting values
Commands Allows the user to execute commands
Event Recorder Allows the user to use the digital fault recorder
FlexLogic Allows the user to read FlexLogic values
Update Info Allows the user to write to any function to which they have read privileges. When any of the Settings, Event
Recorder, and FlexLogic check boxes are enabled by themselves, the user is granted read access. When any
of them are enabled in conjunction with the Update Info box, they are granted read and write access. The
user is not granted write access to functions that are not checked, even if the Update Info field is enabled.
Admin The user is an EnerVista UR Setup administrator and has all of the administrative rights. Exercise caution
when granting administrator rights.
4. Click OK to add the user account to the system.
Modify user privileges
The following pre-requisites are required to modify user privileges in the EnerVista security management system:
• The user modifying the privileges must have administrator rights
• The EnerVista security management system must be enabled (the Enable Security check box is enabled)
To modify user privileges:
1. Select the Security > User Management item from the top menu to open the user management window.
2. Locate the username in the User field.
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
PRODUCT SETUP
5
5-11