GE C30 Instruction Manual page 128

PRODUCT SETUP
To enable the security system and require password use:
1. Select the Security > User Management menu item to open the user management window.
2. Check the Enable Security check box in the lower-left corner to enable the security management system.
If you force password entry by using this feature, ensure that you know the Administrator password. If you do
5
not know the password and are locked out of the software, contact GE Digital Energy for the default password
NOTE or a UR device. When using CyberSentry, the default password is "ChangeMe1#".
Security is now enabled for the EnerVista UR Setup software. Upon starting the software, users are now required to enter a
username and password.
Add a new user
The following pre-requisites are required to add user accounts to the EnerVista security management system:
• The user adding the account must have administrator rights
• The EnerVista security management system must be enabled (previous section)
To add a user account:
1. Select the Security > User Management item from the top menu to open the user management window.
2. Enter a username in the User field. The username must be 4 to 20 characters in length.
5-10
CHAPTER 5: SETTINGS
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL