To view any changes made, use the show running-config logging command in EXEC privilege
mode, as shown in the example for
Setting Up a Secure Connection to a Syslog Server
You can use reverse tunneling with the port forwarding to securely connect to a syslog server.
Pre-requisites
To configure a secure connection from the switch to the syslog server:
1.
On the switch, enable the SSH server
Dell(conf)#ip ssh server enable
2.
On the syslog server, create a reverse SSH tunnel from the syslog server to FTOS switch, using
following syntax:
ssh -R <remote port>:<syslog server>:<syslog server listen port>
user@remote_host -nNf
Management
Configure a UNIX Logging Facility Level
.
69