Dell S4820T Configuration Manual page 895

MIB Object
copyDestFileType
copyDestFileLocation
copyDestFileName
copyServerAddress
copyUserName
copyUserPassword
Simple Network Management Protocol (SNMP)
OID
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.5
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.6
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.7
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.8
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.9
.
1.3.6.1.4.1.6027.3.5.1.1.1.
1.10
Object Values
1 = Dell Networking OS
file
2 = running-config
3 = startup-config
1 = flash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Path (if the file is not in
the default directory)
and filename.
IP Address of the server.
Username for the server. Username for the FTP,
Password for the server.
Description
Specifies the type of file
to copy to.
• If
copySourceFileType
is running-config or
startup-config, the
default
copyDestFileLocatio
n is flash.
• If copyDestFileType
is a binary, you must
specify
copyDestFileLocatio
n and
copyDestFileName.
Specifies the location of
destination file.
• If
copyDestFileLocatio
n is FTP or SCP, you
must specify
copyServerAddress,
copyUserName, and
copyUserPassword.
Specifies the name of
destination file.
The IP address of the
server.
• If you specify
copyServerAddress,
you must also
specify
copyUserName and
copyUserPassword.
TFTP, or SCP server.
• If you specify
copyUserName, you
must also specify
copyUserPassword.
Password for the FTP,
TFTP, or SCP server.
895