Guest And Authentication-Fail Vlans - Dell S4820T Configuration Manual

Figure 11. Dynamic VLAN Assignment
1. Configure 8021.x globally (refer to
(refer to the illustration
2. Make the interface a switchport so that it can be assigned to a VLAN.
3. Create the VLAN to which the interface will be assigned.
4. Connect the supplicant to the port configured for 802.1X.
5. Verify that the port has been authorized and placed in the desired VLAN (refer to the illustration in
Dynamic VLAN Assignment with Port

Guest and Authentication-Fail VLANs

Typically, the authenticator (the Dell system) denies the supplicant access to the network until the
supplicant is authenticated. If the supplicant is authenticated, the authenticator enables the port and
places it in either the VLAN for which the port is configured or the VLAN that the authentication server
indicates in the authentication data.
NOTE: Ports cannot be dynamically assigned to the default VLAN.
110
Enabling 802.1X) along with relevant RADIUS server configurations
inDynamic VLAN Assignment with Port
Authentication).
Authentication).
802.1X