Fcoe Transit Configuration Example - Dell S4820T Configuration Manual

FCFs
Enodes
Sessions
The following example shows the show fip-snooping vlan command.
Dell# show fip-snooping vlan
* = Default VLAN
VLAN FC-MAP FCFs
---- ------ ----
*1 - -
100 0X0EFC00 1

FCoE Transit Configuration Example

The following illustration shows a switch used as a FIP snooping bridge for FCoE traffic between an
ENode (server blade) and an FCF (ToR switch). The ToR switch operates as an FCF and FCoE gateway.
Figure 41. Configuration Example: FIP Snooping on a Switch
In this example, DCBx and PFC are enabled on the FIP snooping bridge and on the FCF ToR switch. On
the FIP snooping bridge, DCBx is configured as follows:
• A server-facing port is configured for DCBx in an auto-downstream role.
• An FCF-facing port is configured for DCBx in an auto-upstream or configuration-source role.
The DCBx configuration on the FCF-facing port is detected by the server-facing port and the DCB PFC
configuration on both ports is synchronized. For more information about how to configure DCBx and
PFC on a port, refer to the
FCoE Transit
: 1
: 2
: 17
Enodes Sessions
------ --------
- -
2 17
Data Center Bridging (DCB) chapter.
355