Creating A Maintenance Intermediate Point - Dell S4820T Configuration Manual

• Up-MEP — monitors the forwarding path internal to a bridge on the customer or provider edge. On
Dell Networking systems, the internal forwarding path is effectively the switch fabric and forwarding
engine.
• Down-MEP — monitors the forwarding path external another bridge.
Configure Up- MEPs on ingress ports, ports that send traffic towards the bridge relay. Configure Down-
MEPs on egress ports, ports that send traffic away from the bridge relay.
1. Create an MEP.
INTERFACE mode
ethernet cfm mep {up-mep | down-mep} domain {name | level } ma-name name
mepid mep-id
The range is from 1 to 8191.
2. Display configured MEPs and MIPs.
EXEC Privilege mode
show ethernet cfm maintenance-points local [mep | mip]
Dell#show ethernet cfm maintenance-points local mep
---------------------------------------------------------------
MPID Domain Name
MA Name
----------------------------------------------------------------
100 cfm0
test0
200 cfm1
test1
300 cfm2
test2

Creating a Maintenance Intermediate Point

Maintenance intermediate point (MIP) is a logical entity configured at a port of a switch that constitutes
intermediate points of a maintenance entity (ME).
An ME is a point-to-point relationship between two MEPs within a single domain. An MIP is not
associated with any MA or service instance, and it belongs to the entire MD.
1. Create a MIP.
INTERFACE mode
ethernet cfm mip domain {name | level } ma-name name
2. Display configured MEPs and MIPs.
EXEC Privilege mode
show ethernet cfm maintenance-points local [mep | mip]
Example of Viewing Configured MIPs
Dell#show ethernet cfm maintenance-points local mip
--------------------------------------------------------------------
MPID Domain Name
MA Name
---------------------------------------------------------------------
0 service1
My_MA 3333
802.1ag
Level Type Port
VLAN Dir MAC
7 MEP Te 4/10
10 DOWN 00:01:e8:59:23:45
6 MEP Te 4/10
20 DOWN 00:01:e8:59:23:45
5 MEP Te 4/10
30 DOWN 00:01:e8:59:23:45
Level Type Port
VLAN Dir MAC
4 MIP Te 1/5
DOWN 00:01:e8:0b:c6:36
CCM-Status
Enabled
Enabled
Enabled
CCM-Status
Disabled
91