Configure The Network Time Protocol; Enabling Ntp; Configuring Ntp Broadcasts - Dell S4820T Configuration Manual

Hide thumbs Also See for S4820T:
Table of Contents

Advertisement

Implementation Information
Dell Networking systems can only be an NTP client.

Configure the Network Time Protocol

Configuring NTP is a one-step process.

Enabling NTP

Related Configuration Tasks

Configuring NTP Broadcasts

Disabling NTP on an Interface
Configuring a Source IP Address for NTP Packets
Enabling NTP
NTP is disabled by default.
To enable NTP, specify an NTP server to which the Dell Networking system synchronizes. To specify
multiple servers, enter the command multiple times. You may specify an unlimited number of servers at
the expense of CPU resources.
Specify the NTP server to which the Dell Networking system synchronizes.
CONFIGURATION mode
ntp server ip-address
Examples of Viewing System Clock
To display the system clock state with respect to NTP, use the show ntp status command from EXEC
Privilege mode.
R6_E300(conf)#do show ntp status
Clock is synchronized, stratum 2, reference is 192.168.1.1
frequency is -369.623 ppm, stability is 53.319 ppm, precision is 4294967279
reference time is CD63BCC2.0CBBD000 (16:54:26.049 UTC Thu Mar 12 2009)
clock offset is 997.529984 msec, root delay is 0.00098 sec
root dispersion is 10.04271 sec, peer dispersion is 10032.715 msec
peer mode is client
To display the calculated NTP synchronization variables received from the server that the system uses to
synchronize its clock, use the show ntp associations command from EXEC Privilege mode.
R6_E300(conf)#do show ntp associations
remote
ref clock st when poll reach delay offset disp
==========================================================
#192.168.1.1 .LOCL.
* master (synced), # master (unsynced), + selected, - candidate
Configuring NTP Broadcasts
With Dell Networking OS, you can receive broadcasts of time information.
You can set interfaces within the system to receive NTP information through broadcast.
To configure an interface to receive NTP broadcasts, use the following commands.
System Time and Date
(optional)
1 16 16 76
0.98
-2.470 879.23
955

Advertisement

Table of Contents
loading

Table of Contents