Center Console - Arctic Cat 2016 Wildcat Sport Service Manual

Mid-sized performance utv
Table of Contents

Advertisement

WT014A
5. Disconnect the LCD gauge, ignition switch, and
12-volt accessory plug.
WT336A
6. Using an appropriate tool, push the bottom dash tabs
in; then push the top tabs in and press the rocker
switches through the dash. Disconnect the rocker
switches and remove the dash.
WT337A
INSTALLING
1. Install the switches into the appropriate locations.
Push the switches into the dash until they snap into
place.
22
WT341
2. Connect the 12-volt accessory plug, ignition switch,
and LCD gauge.
3. With the steering shaft slid through the dash, install
the dash and secure it with the existing fasteners.
4. Using new "patch-lock" cap screws, install the door
latches. Adjust the doors (see Doors in this section);
then tighten to 8 ft-lb.
5. Using a new lock nut, install the tilt assembly and
tighten to 10 ft-lb.
WT338A
6. Install the steering wheel (see Steering Wheel in this
section); then install the hood.

Center Console

REMOVING
1. Remove the seats and engine access panel.
WT037A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents