Servicing Components - Arctic Cat 2016 Wildcat Sport Service Manual

TA073A
CAUTION
When tapping the output shaft, make sure not to drop
the shaft when it releases from the bearing to avoid gear
damage.
11. Remove the outer snap ring and shim securing the
ball bearing; then using an appropriate tool, remove
the bearing.
TA013
TA127

SERVICING COMPONENTS

 NOTE: If any bearing is removed, install a new
bearing using a suitable press.
 NOTE: Keep all components in order for assem-
bling purposes.
A. Output Gear
1. Inspect the bearings for free and smooth turning. If
either bearing does not turn freely, it must be
replaced.
TA016
2. Inspect the gear teeth for nicks, cracks, chips, or
signs of wear. If any are present, the gear must be
replaced.
B. Intermediate Shaft
1. Inspect the bearing for free and smooth turning. If
the bearing does not turn freely, it must be replaced.
TA035
2. Inspect the gear teeth for nicks, cracks, chips, or
signs of wear. If any are present, the gear must be
replaced.
TA036
3. Inspect the shaft gear teeth for nicks, cracks, chips,
or signs of wear. If any are present, the shaft must be
replaced.
C. Shift Shaft Rail
1. Inspect the shift forks for nicks, cracks, chips, or
signs of wear. If any are present, the forks must be
replaced.
131