Engine - Arctic Cat 2016 Wildcat Sport Service Manual

Engine

This section has been organized into sub-sections which
show a progression for the complete servicing of the Arc-
tic Cat Wildcat Sport engine.
To service bottom-side components, the engine must be
removed from the frame. To service top-side or left-side
components, the engine does not have to be removed
from the frame.
NOTE: Arctic Cat recommends the use of new gas-

kets, lock nuts, and seals and lubricating all internal
components when servicing the engine.
NOTE: A new ROV and an overhauled ROV engine

require a "break-in" period. The first 10 hours (or
200 miles) are most critical to the life of this ROV.
Proper operation during this break-in period will
help assure maximum life and performance from the
ROV. Instruct the customer to follow the proper
break-in procedure as described in the Operators
Manual.
SPECIAL TOOLS
A number of special tools must be available to the techni-
cian when performing service procedures in this section.
Refer to the current Special Tools Catalog for the appro-
priate tool description.
NOTE: When indicated for use, each special tool

will be identified by its specific name, as shown in the
chart below, and capitalized.
Description
Magneto Rotor Remover Set
Piston Pin Puller
Spanner Wrench
Surface Plate
V Blocks
Drive and Driven Clutch Center to Center Tool
Clutch Puller
 NOTE: Special tools are available from the Arctic
Cat Service Department.
p/n
0444-254
0644-328
0444-240
0644-016
0644-535
0544-027
0744-080
39