Arctic Cat 2016 Wildcat Sport Service Manual page 20

7. Remove the air pre-filter cover.
WS024A
8. Loosen the clamp securing the clutch air intake tube
to engine; then pry the tube off of engine. Account
for the clamp.
WT487A
9. Remove the fasteners securing the left rear body
panel.
WS053A
10. Remove the panel with the air/clutch intake tubes.
WS048
INSTALLING REAR BODY PANELS
1. If removed, install the clutch air intake tube through
the left rear body opening and secure it with the plate
and existing cap screws. Tighten securely.
WT484A
2. Install the tabs of the body panel into the slots in the
side panel; then route the air intake clutch tube to the
engine.
WT490
WT486
19