Arctic Cat 2016 Wildcat Sport Service Manual page 139

TA056
2. With the aid of an assistant and with the gear forks in
position, install the input shaft and reverse shaft with
chain as an assembly.
TA058
TA059
NOTE: Make sure the shift fork pins face the

installer.
NOTE: Engage all four shafts before seating them

simultaneously into the case.
NOTE: Ensure the chain stays engaged in the

sprocket teeth.
NOTE: The shift shaft rail should remain un-seated

at this point.
3. Install the shift drum into the case; then engage the
fork tabs into the grooves in the shift drum.
138
TA062
4. Pinch the forks together and slide the rail into posi-
tion in the case.
TA063
5. Install the output gear. Use slight force to seat it and
ensure the gear teeth engage with the intermediate
shaft.
TA064
6. Install the park pawl with dowel and spring.
TA074