Exhaust System; Cargo Box - Arctic Cat 2016 Wildcat Sport Service Manual

Exhaust System

REMOVING MUFFLER AND HEAT
SHIELD
1. Remove the four exhaust springs at the muf-
fler/exhaust pipe juncture.
WS111
! WARNING
The heat deflector under the right-rear fender and
around the muffler have sharp edges and can cause
serious injury if care is not taken.
2. Slide the muffler assembly clear of the holder pins.
Account for the exhaust gasket.
3. Remove the six cap screws securing the heat shield
to the muffler.
WS110A
4. With the muffler removed from the vehicle, remove
the six cap screws securing the heat shield to the
muffler.
WS110A
INSPECTING MUFFLER
1. Inspect muffler externally for cracks, holes, and
dents.
2. Inspect the muffler internally by shaking the muffler
back and forth and listening for rattles or loose debris
inside the muffler.
INSTALLING MUFFLER AND HEAT
SHIELD
1. Slide the heat shield over the muffler and secure with
six cap screws.
2. With the gasket in place, place the muffler onto the
holder pins and slide into position.
WT293A
NOTE: Starting with the upper rear pin will aid in

installing.
3. Secure the muffler to the exhaust pipe with the four
exhaust springs.

Cargo Box

REMOVING
1. Remove the seats and rear fenders.
2. Remove the LED taillight assembly.
3. Remove the fasteners securing the upper rear body
panel to the splash guard.
35