Power Connections - Alcatel-Lucent 1665 Installation Manual

Equipment and cable installation
............................................................................................................................................................................................................................................................
Table 1-4 Power connections
Backplane
connection
P14
P15
Notes:
1. Power cables for shelves 4 and 2 are mounted using the connector mounting holes located
closest to the rear of the shelves with the cabling for shelf 2 bending away (out) from the
power connector in shelf 4 and running over it until the power cables exit the bay. The
power runs for shelves 1 and 3 are run in the same manner as described for shelves 2 and
4 using the connector holes located furthest from the rear of the shelf.
............................................................................................................................................................................................................................................................
1 - 2 6
Shelf power
connectors
(on sides) Pin#
BAT A 1
2
BAT B 1
2
Power cable and cable bracket installation
Color Designation
R -48VA
W -48RTNA
R -48VB
W -48RTNB
Name
BAT A
BAT A RTN
BAT B
BAT B RTN
365-372-304R7.1
Issue 2 March 2008