............................................................................................................................................................................................................................................................

Provision/enable/disable TCP/IP on an IAO LAN port

Description

This is an optional task which describes the steps necessary to provision, enable or disable

the TCP/IP on the IAO LAN Port.

Before you begin

Prior to performing this task, you must:

Obtain the work instructions for this task.

•

Know which LAN Port is being provisioned.

•

Obtain the IP Address and IP Subnet Mask of the desired LAN Port and the IP Default

•

Router Address if you are connecting to a router.

Be able to log in to a Alcatel-Lucent 1665 DMX with the WaveStar

•

familiar with the functions of the WaveStar

Procedure

Proceed as follows:

Use the WaveStar

using a Graphical connection.

Determine which IAO LAN Port(s) you want to use (front or rear).

Note:

the front IAO LAN port, use lan-1 as the AID.

From the System View menu, select

Administration -> Data Communications

Result:

In the Data Communications window, click on the TCP/IP tab at the top of the window.

Result:

3 - 1 4

CIT to log in to the Alcatel-Lucent 1665 DMX shelf being provisioned

If you are using the rear IAO LAN port, use lan-2 as the AID. If you are using

The Data Communications window opens

The TCP/IP parameters are displayed.

Provision/enable/disable TCP/IP on an IAO LAN port

CIT.

CIT and be

365-372-304R7.1

Issue 2 March 2008

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Provision/Enable/Disable Tcp/Ip On An Iao Lan Port - Alcatel-Lucent 1665 Installation Manual