............................................................................................................................................................................................................................................................

Repair kits and tools

Repair kits

For the repair or replacement of METRAL signal pins, use one of the following repair

kits:

Berg Electronic MT370-01 Shelf Level Press-Fit Repair Kit

•

IMDARC R-6004 Metral Pin Repair Kit - Comcode 407959881

•

This kit include the tools, parts and instructions for repair and replacement of signal pins.

Replacement pins

Replacement pins are available. These pins are defined by the mating length extending

beyond the inside of the plastic shroud and by their tail length for press-fitting into the

backplane. The tail length includes a compliant press-fit section needed to achieve a gas-

tight connection in four contact areas. All the METRAL pins used on the Alcatel-Lucent

1665 DMX shelves have the same tail length of 4.30 mm (0.169 in.).

Additional replacement signal pins may be ordered in packages of 100 by the part number

shown in

Table D-2 Metral Pins

Type

Ground

Signal Pin

D- 4

Table D-2, "Metral Pins" (p.

Mating Length

(mm)

5.75

8.00

D-4).

Berg Part #

88929-502

88929-519

Repair kits and tools

365-372-304R7.1

Issue 2 March 2008

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Repair Kits And Tools; Metral Pins - Alcatel-Lucent 1665 Installation Manual