•
Electrical isolation
•
•
•
Permissible potential difference between
•
•
•
Isolation in the series tested with
•
•
•
Isolation in the type test tested with
•
•
•
•
Current consumption
•
•
Power dissipation of the module
Status, Interrupts, Diagnostics
Status display
Diagnostic Functions
•
•
Data for Selecting an Actuator for the Relay Output*
Switching capacity and service life of contacts
(voltage 24 VDC)
•
•
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
Up to 60 °C
–
Vertical installation
Up to 40 °C
–
Between output and backplane bus
Between output and power supply
Between output/power supply and shield
Shield and ET 200S bus connection
Shield and I/O (DOs, P1/P2 buses)
ET 200S bus connection and I/O (DOs, P1/
P2 buses)
Shield and ET 200S bus connection
Shield and I/O (DOs, P1/P2 buses)
ET 200S bus connection and I/O (DOs, P1/
P2 buses)
Shield and ET 200S bus connection
Shield and I/O (DOs, P1/P2 buses)
ET 200S bus connection and I/O (DOs, P1/
P2 buses)
Impulse current test between ET 200S bus
connection and I/O (DOs, P1/P2 buses)
From backplane bus
From load voltage L+ (without load)
Group fault display
Diagnostic information can be displayed
Mechanical endurance (without load)
For resistive load
7.3 PM-E F pp DC24V PROFIsafe power module
Technical Specifications
7 A
8 A
Yes
No
Yes
75 VDC/60 VAC
75 VDC/60 VAC
250 VAC
500 VDC/1 min or 600 VDC/1 s
500 VDC/1 min or 600 VDC/1 s
1500 VAC/1 min or 2545 VDC/1 s
350 VAC/1 min
350 VAC/1 min
2830 VAC/1 min
6000 VDC/5 positive and 5 negative pulses
28 mA, maximum
100 mA, typical
4 W, typical
Green LED per channel
•
Green LED for the load voltage
•
Red LED (SF)
Possible
Current
0 A
Current
10 A
8 A
6 A
4 A
Fail-Safe Modules
Number of switching cycles (typ.)
10 million
Number of switching cycles (typ.)
0.23 million
0.3 million
0.38 million
0.5 million
7-35