Siemens SIMATIC ET 200S Installation And Operating Manual page 143

Terminal assignment
The terminal assignment of the EM 4 F-DO 24 VDC/2 A PROFIsafe for the applicable
terminal modules TM-E30S44-01, TM-E30C44-01, TM-E30S46-A1, and TM-E30C46-A1 is
shown in the following figure.
Figure 7-35
Dox P:
Dox M: Terminals for fail-safe digital output 0 (P/M switching)
at TM-E...46-A1: AUX 1 bus implemented. Connection to terminals A3 to A16 for any connection of
PE (individual grouping of load current power supplies possible)
See also
Properties of the PM-E F pm DC24V PROFIsafe Power Module (Page 7-2)
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
Terminal Assignment TM-E...44-01/TM-E...46-A1 for EM 4 F-DO DC24V/2A PROFIsafe
Terminals for fail-safe digital output 0 (P/M switching)
7.6 4 F-DO DC24V/2A PROFIsafe digital electronic module
Fail-Safe Modules
7-83