Siemens SIMATIC ET 200S Installation And Operating Manual page 51

PROFIBUS standard
The ET 200S distributed I/O system is based on the IEC 61784-1:2002 Ed1 CP 3/1
standard.
Shipbuilding approval
Submitted to the following classification bodies
(exception: PM-D F DC24V PROFIsafe for GL (German Lloyd) only:
ABS (American Bureau of Shipping)
BV (Bureau Veritas)
DNV (Det Norske Veritas)
GL (Germanischer Lloyd)
LRS (Lloyds Register of Shipping)
Class NK (Nippon Kaiji Kyokai)
Use in Industry
SIMATIC products are designed for use in industrial environments.
Field of Application
Industry
Use in Residential Areas
If you use the ET 200S in residential areas, you must ensure limit class B (EN 55011) for
emission of radio interference.
Suitable measures for achieving limit class B for emission of radio interference are:
• Installing the ET 200S in grounded switching cubicles/switch boxes
• Use of filters in power supply lines
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
Requirement Relating to
Emitted Interference
EN 50081-2 : 1993 (revoked)
General technical specifications
6.2 Standards and Approvals
Immunity to Interference
EN 50082-2 : 1995
6-5